Podziękowania dla Din76 za pomoc. Wszystko już u mnie działa. Panowie jeśli chodzi o wyłączenie funkcji NIC - Wykodowanie sekundy przemyślenia skrzyni automatycznej to znalazłem informacje z biuletynu BMW dla serwisów z 2009 roku, z niego wynika, że poza zwiększonym spalaniem nie ma to żadnego dodatkowego minusu w postaci zużycia skrzyni itd. Nawet jeśli klient po zakupie nie był zadowolony z dynamiki ruszania to serwisy mu to wyłączały, poniżej teks z biuletynu - wycinek: Important Note: The NIC (Neutral Idle Control) feature disengages the torque converter from the transmission when the vehicle is stationary in the Drive position; the service brakes are applied; and the engine is still in the warm- up phase. The NIC function eliminates engine load when vehicle is stopped, reducing fuel consumption. Although the EGS software changes (as listed above) are improving transmission comfort feel while still providing the benefits of the NIC feature, they still may not be acceptable for the most discriminating customers. In such a case, on a customer complaint basis only, deactivate the NIC function by performing the "Converter lockup clutch" retrofit, using the current Progman/ISTA P version. Poprawcie mnie jeśli się mylę, ale wydaje mi się że można tą funkcje wyłączyć bez większych problemów dla silnika i skrzyni.