Skocz do zawartości

Konfiguracja ICOM z ediabas


Rekomendowane odpowiedzi

Witam

 

Chcę skonfigurować ICOM-a z INPA i resztę jego narzędzi typu NCSExpert itp. Itoolradar oczywiście wykrywa mojego icoma, jego IP to 169.254.92.38. Potem próbuję połaczyć się EasyConnect, wybieram REMOTE, poniżej adres IP mojego Icoma, a w trzecim oknie OBD_ab625. Klikam Check, i nie łączy. Coś mam źle wpisane w Ediabas.ini na 100%. Pozmieniałem wpisy których jestem pewien że tam mam wpisać port 6801 oraz IP mojego icoma, ale paru miejsc nie jestem pewien więc potrzebuję pomocy w dokładnym skonfigurowaniu mojego pliku. Zależy mi na tym żeby poprawnie to działało. Może ktoś porówna ze swoim działającym ediabas.ini na ICOM? Albo ktoś by wrzucił swój plik i porównam sobie sam? Będę mega happy jak ktoś będzie tak życzliwy i pomoże mi z tym problemem.

 

Dziękuję, poniżej jest mój ediabas.ini.

 

 

 

 

;#################
;# EDIABAS 7.2.0 #
;#################

;=============================================================================
[Configuration]
;=============================================================================
Interface        = REMOTE
Simulation       = 0

EcuPath          =C:\EDIABAS\ECU
SimulationPath   =C:\EDIABAS\SIM
TracePath        =C:\EDIABAS\TRACE
TraceSize        = 1024

ApiTrace         = 0
IfhTrace         = 0
; IfhnTrace        = 0

; SystemTraceSys   = 0
; SystemTraceBip   = 0
; SystemTraceIfh   = 0
; SystemTraceNet   = 0

; BipDebugLevel    = 0
; BipErrorLevel    = 0

UbattHandling    = 0
IgnitionHandling = 0
; ClampHandling    = 1

RetryComm        = 1
SystemResults    = 1
TaskPriority     = 0

; CodeMapping      = C:\EC-Apps\EDIABAS\BIN\ansi2oem.tab
; LoadWin32        = 0

NetworkProtocol  = TCP

; --- neu ab EDIABAS 7.2.0 ---------------------------------------------------
ShowIcon         = 1
LogLevel         = 0
TraceBuffering   = 0
TraceHistory     = 0
TraceSync        = 1
; TraceWriter      = <FilePathName>

;=============================================================================
[TCP]
;=============================================================================
RemoteHost             = 169.254.92.38
Port                   = 6801
TimeoutConnect         = 2000
TimeoutReceive         = 2000
TimeoutFunction        = 10000
; TimeResponsePending    = 5000
; DisconnectOnApiEnd     = 1
; InitCmd0               = FE,04,00,03,01
; InitCmd1               = FD,05,00,03,01

;=============================================================================
[XEthernet]
;=============================================================================
RemoteHost       = Autodetect
HeaderFormat     = 0
TesterAddress    = F4,F5
ControlPort      = 6811
DiagnosticPort   = 6801
TimeoutConnect   = 20000

;=============================================================================
[IfhProxy]
;=============================================================================
Port             = 6700


;#############################################################################
;#############################################################################
;##   ausführliche Variante von EDIABAS.ini  (mit Kurz-Info und Default)    ##
;#############################################################################
;#############################################################################

;=============================================================================
; EDIABAS Basic Configuration
; [Configuration]
;=============================================================================

;### new Configuration elements since EDIABAS 7.2 ############################

;-----------------------------------------------------------------------------
; ShowIcon
;       Description :   Enable/Disable EDIABAS-Icon in System-Tray
;       Value       :   0  = EDIABAS-Icon disabled
;                       1  = EDIABAS-Icon enabled
;       Default     =   1
; ShowIcon         = 1

;-----------------------------------------------------------------------------
; LogLevel
;       Description :   Logging of fatal faults in EDIABAS.log
;       Value       :   0  = Logging disabled
;                       1  = Logging enabled
;       Default     =   0
; LogLevel         = 0

;-----------------------------------------------------------------------------
; TraceBuffering
;       Description :   Manner of Opening/Closing of Trace-Files
;       Value       :   0  = Opening/Closing after every dump
;                       1  = Trace-Files stay open
;       Default     =   0
; TraceBuffering   = 0

;-----------------------------------------------------------------------------
; TraceHistory
;       Description :   Number of History-Trace-Files
;       Value       :   0 .. 999
;       Default     =   0
; TraceHistory     = 0

;-----------------------------------------------------------------------------
; TraceSync
;       Description :   Synchronisation of Trace files
;       Value       :   0  = Synchronisation disabled
;                       1  = Synchronisation enabled
;       Default     =   1
; TraceSync        = 1

;-----------------------------------------------------------------------------
; TraceWriter
;       Description :   FilePathName of a private TraceWriter
;       Default     =   .  (Default-TraceWriter "TWFile32.dll")
; TraceWriter      = .


;### older Configuration elements till EDIABAS 7.1 ###########################

;-----------------------------------------------------------------------------
; Simulation
;       Description :   Enable/Disable ECU simulation
;       Value       :   0  = Simulation disabled
;                       1  = Simulation enabled
;       Default     =   0
; Simulation       = 0

;-----------------------------------------------------------------------------
; EcuPath
;       Description :   ECU file path
;       Default     =   .
; EcuPath          = C:\EC-Apps\EDIABAS\ECU

;-----------------------------------------------------------------------------
; SimulationPath
;       Description :   Simulation file path
;       Default     =   .
; SimulationPath   = C:\EC-Apps\EDIABAS\SIM

;-----------------------------------------------------------------------------
; TracePath
;       Description :   Trace file path
;       Default     =   .
; TracePath        = C:\EC-Apps\EDIABAS\TRACE

;-----------------------------------------------------------------------------
; TraceSize
;       Description :   Maximum size of each trace file [KB]
;       Value       :   0 .. 32767
;       Default     =   1024
; TraceSize        = 1024

;-----------------------------------------------------------------------------
; ApiTrace
;       Description :   Enable/Disable API/User trace
;       Value       :   0  = Trace disabled
;                       1  = User trace
;                       2  = User trace + time stamp
;                       3  = User trace + time stamp + process id (Win32)
;                       4  = Function trace
;                       5  = Function trace + time stamp
;                       6  = Function trace + time stamp + timing
;                       7  = Function trace + time stamp + timing + process id (Win32)
;                       8  = Debug trace
;       Default     =   0
; ApiTrace         = 0

;-----------------------------------------------------------------------------
; IfhTrace
;       Description :   Enable/Disable IFH trace
;       Value       :   0  = Trace disabled
;                       1  = User trace
;                       2  = User trace + interface
;                       3  = User trace + interface + time stamp
;       Default     =   0
; IfhTrace         = 0

;-----------------------------------------------------------------------------
; IfhnTrace
;       Description :   Enable/Disable IFH network trace (with XREMOTE)
;       Value       :   0  = Trace disabled
;                       1  = User trace
;                       2  = User trace + interface
;                       3  = User trace + interface + time stamp
;       Default     =   0
; IfhnTrace        = 0

;-----------------------------------------------------------------------------
; SystemTraceSys
;       Description :   Enable/Disable system trace (runtime system)
;       Value       :   0  = Trace disabled
;                       Trace levels 1 .. 7
;       Default     =   0
; SystemTraceSys   = 0

;-----------------------------------------------------------------------------
; SystemTraceBip
;       Description :   Enable/Disable BIP trace (runtime system)
;       Value       :   0  = Trace disabled
;                       Trace levels 1 .. 7
;       Default     =   0
; SystemTraceBip   = 0

;-----------------------------------------------------------------------------
; SystemTraceIfh
;       Description :   Enable/Disable IFH system trace
;       Value       :   0  = Trace disabled
;                       Trace levels 1 .. 7
;       Default     =   0
; SystemTraceIfh   = 0

;-----------------------------------------------------------------------------
; SystemTraceNet
;       Description :   Enable/Disable network trace
;       Value       :   0  = Trace disabled
;                       Trace levels 1 .. 7
;       Default     =   0
; SystemTraceNet   = 0

;-----------------------------------------------------------------------------
; BipDebugLevel
;       Description :   BIP debug level of ECU files
;       Value       :   0 .. 32767
;       Default     =   0
; BipDebugLevel    = 0

;-----------------------------------------------------------------------------
; BipErrorLevel
;       Description :   BIP error level of ECU files
;       Value       :   0 .. 32767
;       Default     =   0
; BipErrorLevel    = 0

;-----------------------------------------------------------------------------
; UbattHandling
;       Description :   Ubatt ON/OFF handling
;       Value       :   0  = Ubatt ON/OFF: No EDIABAS error
;                       1  = Ubatt ON/OFF: EDIABAS error
;       Default     =   1
; UbattHandling    = 0

;-----------------------------------------------------------------------------
; IgnitionHandling
;       Description :   Ignition ON/OFF handling
;       Value       :   0  = Ignition ON/OFF: No EDIABAS error
;                       1  = Ignition ON/OFF: EDIABAS error
;       Default     =   1
; IgnitionHandling = 0

;-----------------------------------------------------------------------------
; ClampHandling
;       Description :   automatic check of clamps for Ubatt and Ignition
;       Value       :   0  = no automatic clamp check with send_and_receive
;                       1  = automatic clamp check with send_and_receive
;       Default     =   1
; ClampHandling    = 1

;-----------------------------------------------------------------------------
; RetryComm
;       Description :   Repeat failed communication automatically (1x)
;       Value       :   0  = Retry disabled
;                       1  = Retry enabled (1x)
;       Default     =   1
; RetryComm        = 1

;-----------------------------------------------------------------------------
; SystemResults
;       Description :   Enable/Disable system results (ubatt/ignition/jobstatus)
;       Value       :   0  = Disable system results
;                       1  = Enable system results
;       Default     =   1
; SystemResults    = 1

;-----------------------------------------------------------------------------
; TaskPriority
;       Description :   EDIABAS process/thread priority (only Win32/16)
;       Value       :   0  = Optimal EDIABAS performance = 8
;                       1  = Minimal EDIABAS performance
;                       ..
;                       10 = Maximal EDIABAS performance
;       Default     =   0
; TaskPriority     = 0

;-----------------------------------------------------------------------------
; CodeMapping
;       Description :   Character mapping file path
;       Default     =   .
; CodeMapping      = C:\EC-Apps\EDIABAS\BIN\ansi2oem.tab

;-----------------------------------------------------------------------------
; LoadWin32
;       Description :   Map EDIABAS Win16 calls to EDIABAS Win32
;       Value       :   0  = Win16/32 Mapping disabled (Win16-->Win16)
;                       1  = Win16/32 Mapping enabled (Win16-->Win32)
;       Default     =   0 for Windows 9x/Me
;       Default     =   1 for Windows NT4/2000/XP
; LoadWin32        = 0

;-----------------------------------------------------------------------------
; NetworkProtocol
;       Description :   Network protocol
;       Default     =
; NetworkProtocol  = TCP

;*****************************************************************************
; Interface
;       Description : Connected diagnosis interface
;       Default     = EDIC
; Interface        = STD:FUNK

; Additional information (in German) :
; Bitte beachten: Der HW-Treiber fuer das Interface muss installiert sein!

;.............................................................................
; Interface      = STD:FUNK
; Beschreibung   : Funk-Diagnose Interface MDA von Fa. Siemens
; Installation   : keine
; INI-Datei      : FUNK.INI
; Unterstuetzung : WIN95,98  16-Bit : Nein
;                  WIN95,98  32-Bit : Ja
;                  WIN NT 4.0       : Ja
;                  WIN XP           : Ja
;   Ansprechpart.: Daniel Haase
;   Telefon      : 089 / 382-43876
;   email        : Daniel.Haase@bmw.de

;.............................................................................
; Interface      = STD:OMITEC
; Beschreibung   : Nachfolger von OBD / enthält CAN-Anbindung / Anschluss an OBD-Dose
; Installation   : \EDIABAS\HARDWARE\OMITEC\AnleitungfuerOMITECInstallation.pdf
; INI-Datei      : siehe \EDIABAS\HARDWARE\OMITEC\Omitec_Doku.pdf
; Unterstuetzung : siehe \EDIABAS\HARDWARE\OMITEC\Omitec_Doku.pdf
;   Ansprechpart.: Reinhold Drexel
;   Telefon      : 089 / 382-44236
;   email        : Reinhold.Drexel@bmw.de

;.............................................................................
; Interface      = STD:OBD
; Beschreibung   : Serieller Pegelwandler (Nachfolger von ADS / Anschluss an OBD-Dose)
; Installation   : \EDIABAS\HARDWARE\OBD\ODBSETUP (nur noetig fuer WIN NT4, WIN 2000, WIN XP)
; INI-Datei      : Suchreihenfolge analog zu EDIABAS.ini
; Unterstuetzung : WIN3.xx          : Nein
;                  WIN95,98  16-Bit : Nein
;                  WIN95,98  32-Bit : Ja
;                  WIN NT 4.0       : Ja
;                  WIN XP           : Ja
;   Ansprechpart.: Reinhold Drexel
;   Telefon      : 089 / 382-44236
;   email        : Reinhold.Drexel@bmw.de

;.............................................................................
; Interface      = EDIC
; Beschreibung   : Anbindung über K-Line
; HW-Derivate    : PC-Card, PCMCIA , W-LAN (Interface von Fa. Softing)
; Installation   : \EDIABAS\HARDWARE\EDIC\SETUP.EXE
; INI-Datei      : EDICFW.INI, EDICHW.INI
; Unterstuetzung : WIN95,98  16-Bit : Nein
;                  WIN95,98  32-Bit : Ja
;                  WIN NT 4.0       : Ja
;                  WIN XP           : Ja
; EDIC-PC, PCMCIA
;   Ansprechpart.: Gerd Huber => EDIABAS-Hotline
;   Telefon      : 089 / 382-68878  (Hotline)
;   email        : Gerd.Huber@bmw.de
; EDIC-NET
;   Ansprechpart.: Daniel Haase
;   Telefon      : 089 / 382-43876
;   email        : Daniel.Haase@bmw.de

;.............................................................................
; Interface      = EDICC
; Beschreibung   : Anbindung über K-Line
; HW-Derivate    : PC-Card, PCMCIA , W-LAN (Interface von Fa. Softing)
; Installation   : \EDIABAS\HARDWARE\EDIC\SETUP.EXE
; INI-Datei      : EDICFW.INI, EDICHW.INI, XEDICC.INI
; Unterstuetzung : WIN95,98  16-Bit : Nein
;                  WIN95,98  32-Bit : Ja
;                  WIN NT 4.0       : Ja
;                  WIN XP           : Ja
; EDIC-PC, PCMCIA
;   Ansprechpart.: Gerd Huber => EDIABAS-Hotline
;   Telefon      : 089 / 382-68878  (Hotline)
;   email        : Gerd.Huber@bmw.de
; EDIC-NET
;   Ansprechpart.: Daniel Haase
;   Telefon      : 089 / 382-43876
;   email        : Daniel.Haase@bmw.de

;.............................................................................
; Interface      = STD:CAN
; Beschreibung   : PCMCIA CAN-Interface CanCardX von Fa. Vector
; Installation   : keine (ausser Installation der CAN-Karte)
; INI-Datei      : CAN32.INI
; Unterstuetzung : WIN95,98  16-Bit : Nein
;                  WIN95,98  32-Bit : Nein
;                  WIN NT 4.0       : Ja
;                  WIN XP           : Ja
; Ansprechpartner: Ralf Jusko => FLASH-Hotline
;   Telefon      : +49-(0)89/382-35891  (Hotline)
;   email        : FLASH.SERVICE@BMW.DE (Hotline)

;.............................................................................
; Interface      = REMOTE
; Beschreibung   : Anbindung eines EDIABAS-Interfaces über TCP/IP (für Normalbetrieb)
; Installation   : Anpassung der Einträge in [TCP] auf beiden Seiten (ins.: RemoteHost, Port)
; INI-Datei      : keine
; Unterstuetzung : WIN95,98  16-Bit : Nein
;                  WIN95,98  32-Bit : Ja
;                  WIN NT 4.0       : Ja
;                  WIN XP           : Ja
; Remote-PC
;   Ansprechpart.: Gerd Huber => EDIABAS-Hotline
;   Telefon      : 089 / 382-68878  (Hotline)
;   email        : Gerd.Huber@bmw.de
; OP(P)S
;   Ansprechpart.: Michael Rowedder
;   Telefon      : 089 / 382-29159
;   email        : Michael.Rowedder@bmw.de
; ICOM
;   Ansprechpart.: Robert Schwinn
;   Telefon      : 089 / 382-10094
;   email        : Robert.Schwinn@bmw.de

;.............................................................................
; Interface      = RPLUS
; Beschreibung   : Anbindung eines EDIABAS-Interfaces über TCP/IP (für PROXY-Betrieb)
; Installation   : Anpassung der Einträge in [TCP] auf beiden Seiten (insb.: RemoteHost, Port)
; INI-Datei      : keine
; Unterstuetzung : ältere systeme   : nicht freigegeben
;                  WIN XP           : Ja
; Remote-PC
;   Ansprechpart.: Gerd Huber => EDIABAS-Hotline
;   Telefon      : 089 / 382-68878  (Hotline)
;   email        : Gerd.Huber@bmw.de
; ICOM (Fertigung)
;   Ansprechpart.: Daniel Haase
;   Telefon      : 089 / 382-43876
;   email        : Daniel.Haase@bmw.de
; ICOM (Vertrieb)
;   Ansprechpart.: Robert Schwinn
;   Telefon      : 089 / 382-10094
;   email        : Robert.Schwinn@bmw.de

;.............................................................................
; Interface      = REMOTE:name
; Beschreibung   : Anbindung eines EDIABAS-Interfaces über TCP/IP (für Parallelbetrieb)
; Installation   : Anpassung der Einträge in [TCP] auf beiden Seiten (ins.: RemoteHost, Port)
; INI-Datei      : REMOTE.INI (insbesondere für Parallelbetrieb notwendig)
;                  In REMOTE.INI stehen unter [name] spezif. Einstellungen(z.B.: RemoteHost, Port)
; Unterstuetzung : WIN95,98  16-Bit : Nein
;                  WIN95,98  32-Bit : Ja
;                  WIN NT 4.0       : Ja
;                  WIN XP           : Ja
; Remote-PC
;   Ansprechpart.: Gerd Huber => EDIABAS-Hotline
;   Telefon      : 089 / 382-68878  (Hotline)
;   email        : Gerd.Huber@bmw.de
; OP(P)S
;   Ansprechpart.: Michael Rowedder
;   Telefon      : 089 / 382-29159
;   email        : Michael.Rowedder@bmw.de
; ICOM (Fertigung)
;   Ansprechpart.: Daniel Haase
;   Telefon      : 089 / 382-43876
;   email        : Daniel.Haase@bmw.de
; ICOM (Vertrieb)
;   Ansprechpart.: Robert Schwinn
;   Telefon      : 089 / 382-10094
;   email        : Robert.Schwinn@bmw.de

;.............................................................................
; Interface      = RPLUS:name   (aktuell: RPLUS:ICOM)
; INI-Datei      : RPLUS.INI (insbesondere für Parallelbetrieb notwendig)
; Beschreibung   : ansonsten Analogie zu „REMOTE:name“
; Unterstuetzung : ältere systeme   : nicht freigegeben
;                  WIN XP           : Ja

;.............................................................................
; Interface      = ENET
; Beschreibung   : Anbindung über Ethernet
; Installation   : Anpassung der Einträge in [XEthernet] (insb.: RemoteHost)
; INI-Datei      : ENET.INI (insbesondere für Parallelbetrieb notwendig)
; Unterstuetzung : WIN95,98  16-Bit : Nein
;                  WIN95,98  32-Bit : nicht freigegeben
;                  WIN NT 4.0       : nicht freigegeben
;                  WIN XP           : Ja
;   Ansprechpart.: Gerd Huber => EDIABAS-Hotline
;   Telefon      : 089 / 382-68878  (Hotline)
;   email        : Gerd.Huber@bmw.de

;.............................................................................
; Interface      = PROXY:<Interface>
; z.B. Interface = PROXY:STD:FUNK
; z.B. Interface = PROXY:ENET

; Beschreibung   : EDIABAS wird im PROXY-Modus betrieben
; Installation   : hängt vom benutzten Interface ab
; INI-Datei      : hängt vom benutzten Interface ab
; Unterstuetzung : WIN95,98  16-Bit : Nein
;                  WIN95,98  32-Bit : nicht freigegeben
;                  WIN NT 4.0       : nicht freigegeben
;                  WIN XP           : Ja
;   Ansprechpart.: Gerd Huber => EDIABAS-Hotline
;   Telefon      : 089 / 382-68878  (Hotline)
;   email        : Gerd.Huber@bmw.de

;*****************************************************************************
; Konfigurationslemente, die existieren,
; aber nicht in EDIABAS.ini geändert werden können

;-----------------------------------------------------------------------------
; BipEcuFile
;       Description :   Dateititel der aktuell geladenen SGBD
;                       (nur gültig während einer Job-Verarbeitung)
;       Value       :   String
;       Default     =   -

;-----------------------------------------------------------------------------
; EdiabasIniPath
;       Description :   Pfad der verwendeten EDIABAS.ini
;       Value       :   String
;       Default     =   -

;-----------------------------------------------------------------------------
; EdiabasVersion
;       Description :   verwendete EDIABAS-Version
;       Value       :   String
;       Default     =   -

;-----------------------------------------------------------------------------
; IfhVersion
;       Description :   verwendete IFH-Version
;       Value       :   String
;       Default     =   -

;-----------------------------------------------------------------------------
; Session
;       Description :   Name der EDIABAS-Session
;       Value       :   String
;       Default     =   -


;=============================================================================
; TCP/IP Configuration
; [TCP]
;=============================================================================

;-----------------------------------------------------------------------------
; RemoteHost
;       Description :   server address/name
;       Default     =   -
; RemoteHost             = 169.254.92.38

;-----------------------------------------------------------------------------
; Port
;       Description :   IP communication port
;       Value       :   1000 < port < 30000
;
;    Spezialfall OP(P)S / ICOM:
;       Value       :   6801  ;OBD-Treiber (CAN)
;       Value       :   6802  ;Most-Treiber
;
;       Default     =   -
; Port                   = 6801
;
; weitere Details siehe Dokumentationen

;-----------------------------------------------------------------------------
; TimeoutConnect
;       Description :   Timeout for establishing the connection
;       Value       :   1000 ... 59000
;       Default     =   5000
; TimeoutConnect         = 2000

;-----------------------------------------------------------------------------
; TimeoutReceive
;       Description :   Timeout for receiving a message
;       Value       :   1000 ... 59000
;       Default     =   5000
; TimeoutReceive         = 2000

;-----------------------------------------------------------------------------
; TimeoutFunction
;       Description :   Timeout for a long function
;       Value       :   5000 ... 59000
;       Default     =   59000
; TimeoutFunction        = 10000

;-----------------------------------------------------------------------------
; TimeResponsePending
;       Description :   Time between alive-messages
;       Value       :   500 ... 59000
;       Default     =   2000
; TimeResponsePending = 5000

;-----------------------------------------------------------------------------
; DisconnectOnApiEnd
;       Description :   Enable/Disable Disconnection with function call ApiEnd
;       Value       :   0  = Disconnection disabled
;                       1  = Disconnection enabled
;       Default     =   0
; DisconnectOnApiEnd     = 1

;-----------------------------------------------------------------------------
; InitCmd<n>
;       Description :   Initialization command <n> (normally for OPPS)
;       Default     =   
; InitCmd0               = FE,04,00,03,01
; InitCmd1               = FD,05,00,03,01


;=============================================================================
; XETHERNET Configuration
; [XEthernet]
;=============================================================================

;-----------------------------------------------------------------------------
; RemoteHost
;       Description :   server address/name
;       Value       :   Autodetect
;                       169.254.1.1   ; Beispiel
;                       192.168.100.1 ; Beispiel
;       Default     =
; RemoteHost       = Autodetect

;-----------------------------------------------------------------------------
; IfhRemoteHost
;       Description :   server address/name
;       Value       :   Autodetect
;                       169.254.1.1   ; Beispiel
;                       192.168.100.1 ; Beispiel
;       Default     =
; IfhRemoteHost    = Autodetect

;-----------------------------------------------------------------------------
; HeaderFormat
;       Description :   type of header
;       Value       :   0 ; 6Byte Header (B-Muster)
;                       1 ; 3Byte Header (A-Muster)
;       Default     =   0
; HeaderFormat     = 0

;-----------------------------------------------------------------------------
; TesterAddress
;       Description :   list of permitted tester adresses
;       Value       :   F4     ; F1 durch F4 ersetzen
;                       F5     ; F1 durch F5 ersetzen
;                       F4,F5  ; F1 zuerst durch F4 ersetzen, dann F1 durch F5 ersetzen
;                       F5,F4  ; F1 zuerst durch F5 ersetzen, dann F1 durch F4 ersetzen
;       Default     =   -
; TesterAddress    = F4,F5

;-----------------------------------------------------------------------------
; ControlPort
;       Description :   port of control channel of TCP connection to ZGW
;       Value       :   1000 < port < 59000
;       Default     =   6811
; ControlPort      = 6811

;-----------------------------------------------------------------------------
; DiagnosticPort
;       Description :   port of diagnostic channel of TCP connection to ZGW
;       Value       :   1000 < port < 59000
;       Default     =   6801
; DiagnosticPort   = 6801

;-----------------------------------------------------------------------------
; TimeoutConnect
;       Description :   timeout in ms for connection to ZGW
;       Value       :   1000 ... 59000
;       Default     =   20000
; TimeoutConnect   = 20000


;=============================================================================
; XPROXY Configuration
; [IfhProxy]
;=============================================================================

;-----------------------------------------------------------------------------
; Port
;	Description :	IP base proxy port
;	Value	    :	1000 < port < 30000
;	Ports       :	+0 = unknown interface
;			+1 = EDIC
;			+2 = EDICC
;			+3 = ENET
;			+4 = STD
;			+5 = REMOT
;	Default     =	6700
; Port             = 6700


;=============================================================================
; End Of File EDIABAS.ini
;=============================================================================

Pozdrawiam,


Maks

Odnośnik do komentarza
Udostępnij na innych stronach

Tak ale jak mam REMOTE to w INPA wyskakuje błąd, a w Tool32 też jest błąd. Jak dam STD:OBD to INPA się uruchamia i Tool32. Czyli jeśli ustawienia są ok to spróbuję. A czy możesz mi powiedzieć które IP ma gdzie być na tym obrazku co poniżej? Które to IP ICOMa a to drugie IP to czego?

 

www.bmw-dominik.pl/ista.JPG

Pozdrawiam,


Maks

Odnośnik do komentarza
Udostępnij na innych stronach

  • 10 miesięcy temu...

Mam ICOM A i teraz mam pytanie, czy wystarczy zwykła przejściówka z 16 na 20 PIN ADS i będzie działać ze starszymi autami jak e34, e36?

Chciałbym nie tylko odczytywać błędy silnika, ale także łaczyć się z innymi modułami w tych starych modelach.

_____________________

Sprzedam nowy filtr powietrza MANN C31143 BMW E60 E61 E63 E64 - 90 zł z wysyłką

Odnośnik do komentarza
Udostępnij na innych stronach

  • 6 miesięcy temu...
  • 6 miesięcy temu...

Jeśli chcesz dodać odpowiedź, zaloguj się lub zarejestruj nowe konto

Jedynie zarejestrowani użytkownicy mogą komentować zawartość tej strony.

Zarejestruj nowe konto

Załóż nowe konto. To bardzo proste!

Zarejestruj się

Zaloguj się

Posiadasz już konto? Zaloguj się poniżej.

Zaloguj się
×
×
  • Dodaj nową pozycję...

Powiadomienie o plikach cookie

Umieściliśmy na Twoim urządzeniu pliki cookie, aby pomóc Ci usprawnić przeglądanie strony. Możesz dostosować ustawienia plików cookie, w przeciwnym wypadku zakładamy, że wyrażasz na to zgodę.